Technical data for Bolted connections with reduced shank, survey and installation

Images: LOG IN | ACTIVATE NOW YOUR FREE ACCOUNT, COSTLESS

INFORMATION RESTRICTED TO THE REGISTERED USERS: LOG IN | ACTIVATE NOW YOUR FREE ACCOUNT, COSTLESS

This product is regulated by the following standards:

Standard DIN 2510-1

Bolted connections with reduced shank, survey and installation

DIN 2510 Table 1. Assembling examples: bolts with hex. nuts - Einbauspiele: Schraubenbolzen mit Sechskantmuttern - Esempi d'assemblaggio: bullone con dado
Publication date:09/1974
Image	bolts	expansion sleeves	hex. nuts	Notes
	L	-	NF	centering through bolts, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;

DIN 2510 Table 2
thread size d1	c1	c2	c3 min	d2	d3	d4	example l1/d1 1&3	example l1/d1 3&4	example l1/d1 5&6	t1
M 12	14	12	16	23	23	23	0.88	0.84	0.92	1.5
M 16	18	16	20	28	28	28	0.9	0.87	0.93	1.5
M 20	22.5	20.5	24	33	33	33	0.92	0.89	0.93	1.5
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
M 56
M 64
M 72 X 6
M 80 X 6
M 90 X 6
M 100 X 6
M 110 x 6
M 120 x 6

DIN 2510 Table 3. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi 0.97d'assemblaggio: bulloni con tappi di cope153rtura
Image163	bolts	expansion sleeves	hex. nuts	Notes
173	KU	-	AF	centering through cap nuts, l1=clamping length+c4+c5, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern, l1=Klemmlänge+c4+c5, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite dadi di copertura , l1 = lunghezza di assemblaggio+ c4+c5 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
183	KU	D	BF	centering through cap nuts and exp. sleeves, l1=clamping length+c6+c7, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern und Dehnhülsen, l1=Klemmlänge+c6+c7, Stufung der Schraubenlänge l1 von 1mm zu 1mm centratura tramite dadie boccole, l1 = lunghezza di assemblaggio+ c6+c7 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;

DIN 2510 Table 4
thread size d1	c4	c5	c6	c7	c8 min	d3	d4	example l1/d1 1&2	example l1/d1 3&4	t1
M 12	30	18	28	16	17	23	23	0.96	0.9	1.5
M 16	35	21	33	19	21	28	28	0.87	0.9	1.5
M 20	41	25	39	23	25	33	33	0.88	0.9	1.5
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
M 56
M 64
M 72 X 6
M 80 X 6
M 90 X 6
M 100 X 6
M 110 x 6
M 120 x 6

DIN 2510 Table 5. Assembling examples: studs with hex. nuts - Einbauspiele: Stiftschrauben mit Sechskantmuttern - Esempi d'assemblaggio: tiranti con dadi esagonali
Image	studs	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	NF	l1=clamping length +c1+t2 or +c1+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c1+t2 oder +c1+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c1+t2 o +c1+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	TF	l1=clamping length +c2+t2 or +c2+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c2+t2 oder +c2+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c2+t2 o +c2+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;

DIN 2510 Table 6
thread size	c1	c2	c9 min	d2	d3	d4	t1	t2	t3	example l1/d1 1&2	example l1/d1 3&4
M 12	14	12	15	23	23	23	1.5	21	23	0.84	0.92
M 16	18	16	19	28	28	28	1.5	25.5	28	0.87	0.93
M 20	22.5	20.5	24	33	33	33	1.5	32.5	35	0.89	0.93
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
M 56
M 64
M 72 X 6
M 80 X 6
M 90 X 6
M 100 X 6
M 110 x 6
M 120 x 6

DIN 2510 Table 7. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi d'assemblaggio: bulloni con tappi di copertura
Image	bolts	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	AF	l1=clamping length +c5+t2 or +c5+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c5+t2 oder +c5+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c5+t2 o +c5+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	BF	l1=clamping length +c7+t2 or +c7+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c7+t2 oder +c7+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c7+t2 o +c7+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;

DIN 2510 Table 8
thread size	c5	c7	c10 min	d3	d4	t1	t2	t3	example l1/d1 3&4	example l1/d1 5&6
M 12	18	16	14	23	23	1.5	21	23	0.96	0.9
M 16	21	1	18	28	28	1.5	25.5	28	0.87	0.9
M 20	25	23	22	33	33	1.5	25.5	35	0.88	0.9
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
M 56
M 64
M 72 X 6
M 80 X 6
M 90 X 6
M 100 X 6
M 110 x 6
M 120 x 6

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

INFORMATION RESTRICTED TO THE REGISTERED USERS: LOG IN | ACTIVATE NOW YOUR FREE ACCOUNT, COSTLESS

Technical data for Bolted connections with reduced shank, survey and installation

This product is regulated by the following standards:

Standard DIN 2510-1

Bolted connections with reduced shank, survey and installation

Suppliers of Bolted connections with reduced shank, survey and installation

Hot forging of fasteners, in special steels, mainly for “Oil & Gas” sector. Our product range includes: • hexagon head screws, socket cap screws and 12-point screws. • hexagon nuts and 12-point nuts • plugs • special parts following customer requirement

Producers of studs, dowelscrews, u-bolts, tie rods turned and milled according to customers drawing. Anchors for galleries forwork

Producer of threaded rods and studs

Manufacturer of hexagon bolts and screws (from M6 up to M42), hexagon nuts (from M6 up to M42), and solid rivets (Ø6 – Ø30). GOST Norms

Manufacturer of special screws and studs from M4 to M50 (4.6, 6.8, 8.8, 10.9, 12.9, B7, etc.)

Manufacturer of studs and stud bolts

Distributor of fittings, flanges, pipes, gaskets and stud bolts

Manufacturer of stud bolts and fasteners both standard and special. Oil&gas and railway sector

Manufacturer of double end stud, stud bolts, both metric and inch sizes