Dieses Produkt unterliegt den folgenden Normen:

ASME B18.3 TABLE 1G ASME B18.3 TABLE 3 ASME B18.3 TABLE 1A ASME B18.3 TABLE 2A

Technische Daten Senden Sie Ihre Angebotsanfrage

Socket head cap screws, inch series

Dieses Produkt unterliegt den folgenden Normen:

Standard ASME B18.3 TABLE 1G

Hexagon socket head cap screws with low head. This product, although a high-strenght precision fastener, is recommended for lighter fastening applications. It is not suggested for use in critical high-strenght applications where socket head cap screws should normally be used. They are designed to be used in applications where head height clearance is a problem. Because of their reduced head height and smaller socket size, they normally cannot be properly preloaded as a standard socket cap screw and should not be subjected to high dynamic loads.


Dimensions in inches - source ASME B18.3 table 1G - 2008- Low head Hex Socket Cap Screws
d basic thread size		Nr of threads x inch		A max	H min	D min	T min	J hex socket
inches	mm	UNC	UNF	A max	H min	D min	T min	J hex socket
4 (0.1129	2.84	40	48	0.183	0.053	0.107	0.038	0.05
5 (0.125)	3.18	40	44	0.205	0.059	0.12	0.044	0.062
6 (0.138)	3.51	32	40	0.226	0.066	0.132	0.05	0.062
8 (0.164)	4.17	32	36	0.27	0.079	0.159	0.06	0.078
10 (0.19)	4.83	24	32	0.312	0.092	0.184	0.072	0.094
1/4	6.35	20	28	0.375	0.121	0.244	0.094	0.125
5/16	7.94	18	24	0.437	0.152	0.305	0.110	0.156
3/8	9.53	16	24	0.562	0.182	0.368	0.115	0.188
7/16	11.11	14	20	0.625	0.213	0.429	0.135	0.219
1/2	12.70	13	20	0.75	0.244	0.492	0.151	0.25
5/8	15.88	11	18	0.875	0.306	0.616	0.25	0.312

Standard ASME B18.3 TABLE 3

Hex and spline socket button head cap screws


Dimensions in inches - source ASME B18.3 table 3 - 2008 hex and spline socket button head cap screws
d basic thread size		Nr of threads x inch		A max	H min	L max standard	T min	J hex socket	M spline socket
inches	mm	UNC	UNF	A max	H min	L max standard	T min	J hex socket	M spline socket
0 (0.06)	1.52	-	80	0.114	0.026	0.5	0.02	0.035	0.048
1 (0.073)	1.85	64	72	0.139	0.033	0.5	0.028	0.05	0.06
2 (0.086)	2.18	56	64	0.164	0.046	0.5	0.028	0.05	0.06
3 (0.099)	2.51	48	56	0.188	0.052	0.5	0.035	0.062	0.072
4 (0.1129	2.84	40	48	0.213	0.059	0.5	0.035	0.062	0.072
5 (0.125)	3.18	40	44	0.238	0.066	0.5	0.044	0.078	0.096
6 (0.138)	3.51	32	40	0.262	0.073	0.63	0.044	0.078	0.096
8 (0.164)	4.17	32	36	0.312	0.087	0.750	0.052	0.094	0.111
10 (0.19)	4.83	24	32	0.361	0.101	1	0.07	0.125	0.145
1/4	6.35	20	28	0.437	0.132	1	0.087	0.156	0.183
5/16	7.94	18	24	0.547	0.166	1	0.105	0.188	0.216
3/8	9.53	16	24	0.656	0.199	1	0.122	0.219	0.251
1/2	12.70	13	20	0.875	0.265	2	0.175	0.312	0.372
5/8	15.88	11	18	1	0.331	2	0.21	0.375	0.454

Standard ASME B18.3 TABLE 1A

Hexagon socket head cap screws. The socket head shall have a flat chamfered top surface with smooth or knurled cylindrical sides and a flat bearing surface.


Dimensions in inches - source ASME B18.3 table 1A Publication date: 2003
d basic thread size		Nr of threads x inch		dk max	k max	t min	b min	S nom	M nom
inches	mm	UNC	UNF	dk max	k max	t min	b min	S nom	M nom
0	1.52	-	80	0.096	0.060	0.025	0.5	0.05	0.06
N° 1	1.85	64	72	0.118	0.073	0.031	0.62	0.062	0.072
N° 2	2.18	56	64	0.140	0.086	0.038	0.62	0.078	0.096
N° 3	2.51	48	56	0.161	0.099	0.044	0.62	0.078	0.096
N° 4	2.84	40	48	0.183	0.112	0.051	0.75	0.094	0.111
N° 5	3.18	40	44	0.205	0.125	0.057	0.75	0.094	0.111
N° 6	3.51	32	40	0.226	0.138	0.064	0.75	0.109	0.133
N° 8	4.17	32	36	0.270	0.164	0.077	0.88	0.141	0.168
N° 10	4.83	24	32	0.312	0.190	0.090	0.88	0.156	0.183
1/4	6.35	20	28	0.375	0.250	0.120	1	0.188	0.216
5/16	7.94	18	24	0.469	0.312	0.151	1.12	0.25	0.291
3/8	9.53	16	24	0.562	0.375	0.182	1.25	0.312	0.372
7/16	11.11	14	20	0.656	0.438	0.213	1.38	0.375	0.454
1/2	12.70	13	20	0.750	0.5	0.245	1.5	0.375	0.454
5/8	15.88	11	18	0.938	0.625	0.307	1.75	0.5	0.595
3/4	19.05	10	16	1.125	0.750	0.370	2	0.625	0.620
7/8	22.23	9	14	1.312	0.875	0.432	2.25	0.75	0.698
1	25.40	8	12	1.5	1	0.495	2.5	0.75	0.790
1 1/8	28.58	7	12	1.687	1.125	0.557	2.81	0.875	-
1 1/4	31.75	7	12	1.875	1.250	0.620	3.12	0.875	-
1 3/8	34.93	6	12	2.062	1.375	0.682	3.44	1	-
1 1/2	38.10	6	12	2.25	1.5	0.745	3.75	1	-
1 3/4	28.58	5	-	2.625	1.75	0.870	4.38	1.25	-
2	34.93	4.5	-	3	2	0.995	5	1.5	-
2-1/4	38.10	4.5	-	3.375	2.25	1.20	5.62	1.75	-
2-1/2	63.50	4	-	3.75	2.5	1.245	6.25	1.75	-
2-3/4	69.85	4	-	4.125	2.75	1.370	6.88	2	-
3	76.20	4	-	4.5	3	1.495	7.5	2.25	-
3-1/4	82.55	4	-	4.875	3.25	1.620	8.12	2.25	-
3-1/2	88.90	4	-	5.25	3.5	1.745	8.75	2.75	-
3-3/4	95.25	4	-	5.625	3.75	1.870	9.38	2.75	-
4	101.6	4	-	6	4	1.995	10	3	-

Approx. mass, in kg x1000 pcs, (ρ=7,85 kg/dm³) -
d thread size	4-40	6-32	8-32	10-24	10-32	1/4	5/16	3/8	7/16	1/2	5/8	3/4
nominal length l
1/4	0,53	0,93	1,49	2,19	2,25
5/16	0,58	1,01	1,61	2,36	2,43	4,37
3/8	0,64	1,10	1,74	2,51	2,60	4,65	8,41
7/16	0,70	1,19	1,87	2,68	2,78	4,95	8,88
1/2	0,75	1,27	2,00	2,84	2,97	5,24	9,35	15,07
5/8	0,87	1,45	2,26	3,18	3,32	5,81	10,29	16,43	24,45	36,13
3/4	0,99	1,61	2,50	3,50	3,67	6,39	11,23	17,82	26,33	38,61	69,10
7/8	1,10	1,78	2,76	3,83	4,03	6,97	12,18	19,18	28,21	41,11	73,06
1	1,29	2,07	3,02	4,16	4,39	7,54	13,10	20,56	30,09	43,61	77,02
1-1/4	1,51	2,53	3,74	5,15	5,36	8,70	14,97	23,31	33,86	48,60	84,91	135,22
1-1/2	1,89	2,87	4,26	5,81	6,07	10,60	16,83	26,03	37,62	53,59	92,85	146,84
1-3/4	2,12	3,45	5,05	6,91	7,11	11,75	20,02	30,23	41,40	58,58	100,77	158,46
2	2,49	3,79	5,56	7,56	7,82	13,65	21,89	32,98	47,52	63,55	108,69	170,07
2-1/4	2,72	4,38	6,36	8,66	8,86	14,81	24,75	36,92	51,28	69,59	116,61	181,68
2-1/2	3,10	4,71	6,87	9,32	9,57	16,71	26,73	39,90	56,95	74,56	129,75	193,33
2-3/4	3,33	5,30	7,66	10,41	10,62	17,87	29,60	44,08	60,71	79,56	137,67	204,91
3	3,70	5,63	8,17	11,08	11,33	19,77	31,48	46,82	66,37	85,55	145,59	225,84
3-1/4						20,89	34,38	51,01	70,15	90,55	158,75	237,48
3-1/2						22,83	36,25	53,75	75,83	95,53	166,67	249,06
3-3/4						23,98	39,17	57,93	79,59	101,53	174,59	260,67
4						25,88	41,04	60,68	85,23	106,51	187,76	281,60
4-1/4						27,03	43,95	64,84	88,99	111,51	165,98	293,21
4-1/2						28,94	45,83	67,61	94,68	117,50	203,60	304,82
4-3/4						30,09	48,75	71,78	93,49	122,50	216,79	316,45
5						31,99	50,62	74,54	104,10	127,50	224,71	337,36
5-1/4						33,15	53,55	78,70	107,90	133,48	232,63	348,98
5-1/2						35,05	55,44	81,47	113,54	138,49	245,80	360,60
5-3/4						36,21	58,34	85,63	117,30	143,47	253,71	372,21
6						38,21	60,21	88,37	122,97	149,48	261,63	393,13
6-1/4						39,27	63,12	92,56	126,71	154,46	274,80	404,77
6-1/2						41,18	66,03	95,30	132,40	159,45	282,72	416,36
6-3/4						42,32	67,92	99,49	136,16	165,43	290,64	447,78
7						44,22	69,79	102,22	141,85	170,42	303,80	448,92

Standard ASME B18.3 TABLE 2A

Socket Flat Countersunk Head Cap Screws. The flat countersunk head shall have a flat top sur-face and a conical bearing surface with included angle of approximately 82 deg.


Dimensions in inches - ASME b18.3Table 2A - 2008- Socket Flat Countersunk Head Cap Screws
d thread size		Nr. of threads x inch		d1 min	b basic thread length	dk max theo.Sharp	k max	t min	S nom	M nom
inches	mm	UNC	UNF	d1 min	b basic thread length	dk max theo.Sharp	k max	t min	S nom	M nom
0 (0.06)	1.52	-	80	0.568	0.5	0.138	0.044	0.025	0.035	0.048
1 (0.073)	1.85	64	72	0.07	0.62	0.168	0.054	0.031	0.05	0.06
2 (0.086)	2.18	56	64	0.082	0.62	0.197	0.064	0.038	0.05	0.06
3 0.099)	2.51	48	56	0.095	0.62	0.226	0.073	0.044	0.062	0.072
4 (0.112)	2.84	40	48	0.108	0.75	0.255	0.083	0.055	0.062	0.072
5 (0.125)	3.18	40	44	0.12	0.75	0.281	0.90	0.061	0.078	0.096
6 (0.138)	3.51	32	40	0.133	0.75	0.307	0.097	0.066	0.078	0.096
8 (0.164)	4.17	32	36	0.159	0.875	0.359	0.112	0.076	0.094	0.111
10 (0.19)	4.83	24	32	0.184	0.875	0.411	0.127	0.087	0.125	0.145
1/4	6.35	20	28	0.244	1	0.531	0.161	0.111	0.156	0.183
5/16	7.94	18	24	0.305	1.125	0.656	0.198	0.135	0.188	0.216
3/8	9.53	16	24	0.368	1.25	0.781	0.234	0.159	0.219	0.251
7/16	11.11	14	20	0.429	1.375	0.844	0.234	0.159	0.25	0.291
1/2	12.70	13	20	0.492	1.5	0.938	0.251	0.172	0.312	0.372
5/8	15.88	11	18	0.616	1.75	1.188	0.324	0.220	0.375	0.454
3/4	19.05	10	16	0.741	2	1.438	0.396	0.220	0.5	0.454
7/8	22.23	9	14	0.865	2.25	1.688	0.468	0.248	0.562	-
1	25.40	8	12	0.989	2.5	1.938	0.540	0.297	0.625	-
1-1/8	28.58	7	12	1.108	2.81	2.188	0.611	0.325	0.75	-
1-1/4	31.75	7	12	1.233	3.12	2.438	0.683	0.358	0.875	-
1-3/8	34.93	6	12	1.357	3.44	2.688	0.755	0.402	0.875	-
1-1/2	38.10	6	12	1.482	3.75	2.938	0.827	0.435	1	-

Socket head cap screws, inch series

Dimensions in inches - source ASME B18.3 table 1A - 2008- Socket head cap screws
d basic thread size		Nr of threads x inch		dk max	k max	b min	S nom	M nom
inches	mm	UNC	UNF	dk max	k max	b min	S nom	M nom
0	1.52	-	80	0.096	0.060	0.5	0.05	0.06
N° 1	1.85	64	72	0.118	0.073	0.62	0.062	0.072
N° 2	2.18	56	64	0.140	0.086	0.62	0.078	0.096
N° 3	2.51	48	56	0.161	0.099	0.62	0.078	0.096
N° 4	2.84	40	48	0.183	0.112	0.75	0.094	0.111
N° 5	3.18	40	44	0.205	0.125	0.75	0.094	0.111
N° 6	3.51	32	40	0.226	0.138	0.75	0.109	0.133
N° 8	4.17	32	36	0.270	0.164	0.88	0.141	0.168
N° 10	4.83	24	32	0.312	0.190	0.88	0.156	0.183
1/4	6.35	20	28	0.375	0.250	1	0.188	0.216
5/16	7.94	18	24	0.469	0.312	1.12	0.25	0.291
3/8	9.53	16	24	0.562	0.375	1.25	0.312	0.372
7/16	11.11	14	20	0.656	0.438	1.38	0.375	0.454
1/2	12.70	13	20	0.750	0.5	1.5	0.375	0.454
5/8	15.88	11	18	0.938	0.625	1.75	0.5	0.595
3/4	19.05	10	16	1.125	0.750	2	0.625	0.620
7/8	22.23	9	14	1.312	0.875	2.25	0.75	0.698
1	25.40	8	12	1.5	1	2.5	0.75	0.790
1 1/8	28.58	7	12	1.687	1.125	2.81	0.875	-
1 1/4	31.75	7	12	1.875	1.250	3.12	0.875	-
1 3/8	34.93	6	12	2.062	1.375	3.44	1	-
1 1/2	38.10	6	12	2.25	1.5	3.75	1	-
1 3/4	28.58	5	-	2.625	1.75	4.38	1.25	-
2	34.93	4.5	-	3	2	5	1.5	-
2-1/4	38.10	4.5	-	3.375	2.25	5.62	1.75	-
2-1/2	63.50	4	-	3.75	2.5	6.25	1.75	-
2-3/4	69.85	4	-	4.125	2.75	6.88	2	-
3	76.20	4	-	4.5	3	7.5	2.25	-
3-1/4	82.55	4	-	4.875	3.25	8.12	2.25	-
3-1/2	88.90	4	-	5.25	3.5	8.75	2.75	-
3-3/4	95.25	4	-	5.625	3.75	9.38	2.75	-
4	101.6	4	-	6	4	10	3	-


Dimensions in inches - source ASME B18.3 table 1G - 2008- Low head Hex Socket Cap Screws
d basic thread size		Nr of threads x inch		A max	H min	D min	T min	J hex socket
inches	mm	UNC	UNF	A max	H min	D min	T min	J hex socket
4 (0.1129	2.84	40	48	0.183	0.053	0.107	0.038	0.05
5 (0.125)	3.18	40	44	0.205	0.059	0.12	0.044	0.062
6 (0.138)	3.51	32	40	0.226	0.066	0.132	0.05	0.062
8 (0.164)	4.17	32	36	0.27	0.079	0.159	0.06	0.078
10 (0.19)	4.83	24	32	0.312	0.092	0.184	0.072	0.094
1/4	6.35	20	28	0.375	0.121	0.244	0.094	0.125
5/16	7.94	18	24	0.437	0.152	0.305	0.110	0.156
3/8	9.53	16	24	0.562	0.182	0.368	0.115	0.188
7/16	11.11	14	20	0.625	0.213	0.429	0.135	0.219
1/2	12.70	13	20	0.75	0.244	0.492	0.151	0.25
5/8	15.88	11	18	0.875	0.306	0.616	0.25	0.312


Dimensions in inches - ASME b18.3Table 2A - 2008-Socket Flat Countersunk Head Cap Screws
d thread size		Nr. of threads x inch		d1 min	b basic thread length	dk max theo.Sharp	k max	t min	S nom	M nom
inches	mm	UNC	UNF	d1 min	b basic thread length	dk max theo.Sharp	k max	t min	S nom	M nom
0 (0.06)	1.52	-	80	0.568	0.5	0.138	0.044	0.025	0.035	0.048
1 (0.073)	1.85	64	72	0.07	0.62	0.168	0.054	0.031	0.05	0.06
2 (0.086)	2.18	56	64	0.082	0.62	0.197	0.064	0.038	0.05	0.06
3 0.099)	2.51	48	56	0.095	0.62	0.226	0.073	0.044	0.062	0.072
4 (0.112)	2.84	40	48	0.108	0.75	0.255	0.083	0.055	0.062	0.072
5 (0.125)	3.18	40	44	0.12	0.75	0.281	0.90	0.061	0.078	0.096
6 (0.138)	3.51	32	40	0.133	0.75	0.307	0.097	0.066	0.078	0.096
8 (0.164)	4.17	32	36	0.159	0.875	0.359	0.112	0.076	0.094	0.111
10 (0.19)	4.83	24	32	0.184	0.875	0.411	0.127	0.087	0.125	0.145
1/4	6.35	20	28	0.244	1	0.531	0.161	0.111	0.156	0.183
5/16	7.94	18	24	0.305	1.125	0.656	0.198	0.135	0.188	0.216
3/8	9.53	16	24	0.368	1.25	0.781	0.234	0.159	0.219	0.251
7/16	11.11	14	20	0.429	1.375	0.844	0.234	0.159	0.25	0.291
1/2	12.70	13	20	0.492	1.5	0.938	0.251	0.172	0.312	0.372
5/8	15.88	11	18	0.616	1.75	1.188	0.324	0.220	0.375	0.454
3/4	19.05	10	16	0.741	2	1.438	0.396	0.220	0.5	0.454
7/8	22.23	9	14	0.865	2.25	1.688	0.468	0.248	0.562	-
1	25.40	8	12	0.989	2.5	1.938	0.540	0.297	0.625	-
1-1/8	28.58	7	12	1.108	2.81	2.188	0.611	0.325	0.75	-
1-1/4	31.75	7	12	1.233	3.12	2.438	0.683	0.358	0.875	-
1-3/8	34.93	6	12	1.357	3.44	2.688	0.755	0.402	0.875	-
1-1/2	38.10	6	12	1.482	3.75	2.938	0.827	0.435	1	-


Dimensions in inches - source ASME B18.3 table 3 - 2008 hex and spline socket button head cap screws
d basic thread size		Nr of threads x inch		A max	H min	L max standard	T min	J hex socket	M spline socket
inches	mm	UNC	UNF	A max	H min	L max standard	T min	J hex socket	M spline socket
0 (0.06)	1.52	-	80	0.114	0.026	0.5	0.02	0.035	0.048
1 (0.073)	1.85	64	72	0.139	0.033	0.5	0.028	0.05	0.06
2 (0.086)	2.18	56	64	0.164	0.046	0.5	0.028	0.05	0.06
3 (0.099)	2.51	48	56	0.188	0.052	0.5	0.035	0.062	0.072
4 (0.1129	2.84	40	48	0.213	0.059	0.5	0.035	0.062	0.072
5 (0.125)	3.18	40	44	0.238	0.066	0.5	0.044	0.078	0.096
6 (0.138)	3.51	32	40	0.262	0.073	0.63	0.044	0.078	0.096
8 (0.164)	4.17	32	36	0.312	0.087	0.750	0.052	0.094	0.111
10 (0.19)	4.83	24	32	0.361	0.101	1	0.07	0.125	0.145
1/4	6.35	20	28	0.437	0.132	1	0.087	0.156	0.183
5/16	7.94	18	24	0.547	0.166	1	0.105	0.188	0.216
3/8	9.53	16	24	0.656	0.199	1	0.122	0.219	0.251
1/2	12.70	13	20	0.875	0.265	2	0.175	0.312	0.372
5/8	15.88	11	18	1	0.331	2	0.21	0.375	0.454

Vollständige Liste von Anbietern von Socket head cap screws, inch series

Italy

Buora d.p.u. S.r.l.

Founded in 1969, Buora D.P.U. is a distributor certified following ISO 9001.

The company offers the complete range of high strength fasteners, ready on stock, both coarse and fine pitches with metric and inch threads.

Distributor of prestigious brands such as UNBRAKO and NORD-LOCK, for Buora D.P.U. the service always comes first, therefore there is not minimum quantity required.

Netherlands

Triofast BV

Distributor of standard and special fasteners.

The company supplies fasteners with various types of thread: UNC, UNF, BSW and BSF. The products meet standards such as ISO, DIN, ASTM, ANSI and BS.

Germany

Pfitzer Verbindungstechnik Gmbh

Distributor of inch sized fasteners, oil and gas fasteners and turned special screws

Thailand

B...

Manufacturer of hex head screws, carriage bolts and socket cap screws

Italy

B...

Manufacturer of hot forged fasteners and nip bolts, from M20 to M64

C...

Manufacturer of socket screws and Tee Slot Bolts both metric and imperial

Italy

F...

We offer logistics and inventory management and integrated supply chain management services covering a wide market of OEM fasteners (KanBan), MRO and Personal Protective Equipment (Vending Machine).

Taiwan

F...

One of the main producers of socket cap screws in haig tensile steels: 10.9 12.9 14.99

Germany

F...

Distributor of aerospace fasteners

USA

H...

Manufacturer of hex-socket screw in inch

Taiwan

J...

Manufacturer of standard and special fasteners, from M4 to M30, from 1/4' to 1-1/4'. Lengths from 10 to 300mm and from 1/2' to 12'.

K...

Manufacturer of threaded items, mainly screwed rods, engineering studs, bright bolts and sets and special items according to customer specifications

USA

K...

Manufacturer of socket cap screws both in metric and inch dimensions

Taiwan

L...

Manufacturer of six-lobe screws, micro screws, screws for plastics and trilobular screws. Torx licensed, and other pantent drives and threads

India

M...

Manufacturer of screws, nuts, washers and threaded rods

Germany

P...

Distributor specialized in inch thread fasteners

Germany

S...

Distributor of inch fasteners as per British and American standards

China

S...

One of the largest fasteners manufacturer and exporter in China.

Hexagon and socket screws, high strength hex bolts (ASTM GR5 and GR8, DIN and ISO CL.8.8 and 10.9)

The surface plating includes Black, Zinc Bright, Zinc Yellow, Hot Dip Galvanize, Dacromet, Geomet and others.

Taiwan

Y...

One of the world''s largest manufactures of Alloy Steel Hexagon Socket Screws: Hex Socket Cap, Flat Head Sockets, Shoulder Screws, Button Head Sockets, Hex. Heads, Socket SET Screws.

Das Portal für Halterungen und Befestigungselemente

Lieferanten von Socket head cap screws, inch series

Technische Daten

Standard ASME B18.3 TABLE 1G

Standard ASME B18.3 TABLE 3

Standard ASME B18.3 TABLE 1A

Standard ASME B18.3 TABLE 2A

Daten

Buora d.p.u. S.r.l.

Triofast BV

Pfitzer Verbindungstechnik Gmbh

B...

B...

C...

F...

F...

F...

H...

J...

K...

K...

L...

M...

P...

S...

S...

S...

S...

S...

T...

T...

T...

T...

U...

U...

Y...