Suppliers of Drill bits

Standard DIN 333

Dimensions in mm - source DIN 333 Form R
Publication date: 04/1986 Replaces 11/1973 edition
d1	d2	l1	l2	r min	r max
0.5	3.15	25	2,12	1,6	1,5
0,8
1
1,25
1,6
2
2,5
3,15
4
5
6,3
8
10
12,5

Dimensions in mm - source DIN 333 Form A
Publication date: 04/1986 Replaces 11/1973 edition
d1	d2	l1	l2
0,5	3,15	25	0,8
0,8
1
1,25
1,6
2
2,5
3,15
4
5
6,3
8
10
12,5

Dimensions in mm - source DIN 333 Form B
Publication date: 04/1986 Replaces 11/1973 edition
d1	d2	d3	l1	l2
1	4	2,12	35,5	1,3
1,25
1,6
2
2,5
3,15
4
5
6,3
8
10

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 335

Dimensions in mm - source DIN 335 Form A
Publication date: 12/2007 Replaces 09/1979 edition
d1	d2	d3	l1	l2	Nr. of cutters
8	-	-	48	-	5
12,5
16
20

Dimensions in mm - source DIN 335 Form B
Publication date: 12/2007 Replaces 09/1979 edition
d1	d3	l1	l2	l3	Nr. of cutters
16	3,2	95	20	30	6 or7
25
31,5
40
50
63
80

Dimensions in mm - source DIN 335 Form C
Publication date: 12/2007 Replaces 09/1979 edition
d1	d2	d3	l1	l2	l4
4,3	4	1,3	40	3,5	26
5	4	1,5	40	4	28
5,3
5,8
6
6,3
7
7,3
8
8,3
9,4
10
10,4
11,5
12,4
13,4
15
16,5
19
20,5
23
25

Dimensions in mm - source DIN 335 Form D
Publication date: 12/2007 Replaces 09/1979 edition
d1	d2	l1	l2	r min	r max
0.5	3.15	25	2,12	1,6	1,5
0,8
1
1,25
1,6
2
2,5
3,15
4
5
6,3
8
10
12,5

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 338

Dimensions in mm - source DIN 338
Publication date: 11/2006 Replaces 03/1978 edition
d	d: range		l1	l2
d	from	to	l1	l2
0,2- 0,22	0,19	0,24	19	2,5
0,25-0,28-0,3	0,24	0,3	19	3
0,32-0,35-0,38	0,3	0,38	19	4
0,4-0,42-0,45-0,48	0,38	0,48	20	5
0,5-0,52	0,48	0,53	22	6
0,55-0,58-0,6
0,62-0,65
0,68-0,7-0,72,0,75
0,78-0,8-0,82-0,85
0,88-0,9-0,92-0,95
0,98-1-1,05
1,1-1,15
1,2-1,25-1,3
1,35-1,4-1,45-1,5
1,55-1,6-1,65-1,7
1,75-1,8-1,85-1,9
1,95-2-2,05-2,1
2,15-2,2-2,25-2,3-2,35
2,4-2,45-2,5-2,55-2,6-2,65
2,7-2,75-2,8-2,85-2,9-2,95-3
3,1-3,2-3,3
3,4-3,5-3.6-3,7
3,8-3,9-4-4,1-4,2
4.3-4.4-4.5-4.6-4.7
4.8-4.9-5-5.1-5.2-5.3
5.4-5.5-5.6-5.7-5.8-5.9-6
6.1-6.2-6.3-6.4-6.5-6.6-6.7
6.8-6.9-7-7.1-7.2-7.3-7.4-7.5
7.6-7.7-7.8-7.9-8-8.1-8.2-8.3-8.4-8.5
8.6-8.7-8.8-8.9-9-9.1-9.2-9.3-9.4-9.5
9.6-9.7-9.8-9.9-10-10.1-10.2-10.3-10.4-10.5-10.6
10.7-10.8-10.9-11-11.1-11.2-11.3-11.4-11.5-11.6-11.7-11.8
11.9-12-12.1-12.2-12.3-12.4-12.5-12.6-12.7-12.8
12.9-13-13.1-13.2
13.3-13.4-13.5-13.6-13.7-13.8-13.9-14
14.25-14.5-14.75-15
15.25-15.5-15.75-16
16.5-17
17.5-18
18.5-19
19.5-20

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 340

Dimensions in mm - source DIN 340
Publication date: 11/2006 Replaces 03/1978 edition
d	d: range		l1	l2
d	from	to	l1	l2
1	0,95	1,06	56	33
1,1	1,06	1,18	60	37
1,2-1,3	1,18	1,32	65	41
1,4-1,5
1,6-1,7
1,8-1,9
2-2,1
2,2-2,3
2,4-2,5-2,6
2,7-2,8-2,9-3
3,1-3,2-3,3
3,4-3,5-3.6-3,7
3,8-3,9-4-4,1-4,2
4.3-4.4-4.5-4.6-4.7
4.8-4.9-5-5.1-5.2-5.3
5.4-5.5-5.6-5.7-5.8-5.9-6
6.1-6.2-6.3-6.4-6.5-6.6-6.7
6.8-6.9-7-7.1-7.2-7.3-7.4-7.5
7.6-7.7-7.8-7.9-8-8.1-8.2-8.3-8.4-8.5
8.6-8.7-8.8-8.9-9-9.1-9.2-9.3-9.4-9.5
9.6-9.7-9.8-9.9-10-10.1-10.2-10.3-10.4-10.5-10.6
10.7-10.8-10.9-11-11.1-11.2-11.3-11.4-11.5-11.6-11.7-11.8
11.9-12-12.1-12.2-12.3-12.4-12.5-12.6-12.7-12.8-12.9-13-13.1-13.2
13.3-13.4-13.5-13.6-13.7-13.8-13.9-14
14.25-14.5-14.75-15
15.25-15.5-15.75-16
16.25-16.5-16.75-17
17.25-17.5-17.75-18
18.25-18.5-18.75-19
19.25-19.5-19.75-20

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 345

Dimensions in mm - source DIN 345

Publication date: 11/2006 Replaces 03/1978 edition
d	d: range		l1	l2	1: Morse taper B acc. to DIN 228-1 Size
d	from	to	l1	l2	1: Morse taper B acc. to DIN 228-1 Size
3	2.65	3	114	33	1
3.2	3	3.35	117	36
3.5	3.35	3.75	120	39
3,8-4-4,2	3,75	4,25	124	43
4.5	4,25	4,75	128	47
4.8-5-5.2	4.75	5.3	133	52
5.5-.8-6	5.3	6	138	57
6.2-6.5
6.8-7-7.2-7.5
7.8-8-8.2-8.5
8.8-9-9.2-9.5
9.8-10-10.2-10.5
10.8-11-11.2-11.5-11.8
12-12.2-12.5-12.8-13-13.2
13.5-13.8-14
14.25-14.5-14.75-15
5.25-15.5-15.75-16
16.25-16.5-16.75-17
17.25-17.5-17.75-18
18.25-18.5-18.75-19
19.25-19.5-19.75-20
20.25-20.5-20.75-21
21.25-21.5-21.75-22-22.25
22.5-22.75-23
23.25-23.5
23.75-24-24.25-24.5-24.75-25
25.25-25.5-25.75-26-26.25-26.5
26.75-27.25-27.5-27.75-28
28.25-28.5-28.75-29-29.25-29.5-29.75-30
30.25-30.5-30.75-31-31.25-31.5
31.75
32-32.5-33-33.5
4.5-35-35.5
36-36.5-37-37.5
38-38.5-39-39.5-40
40.5-41-41.5-42-42.5
43-43.5-44-44.5-45
45.5-46-46.5-47-47.5
48-48.5-49-49.5-50
50.5
51-52-53
-55-56
57-58-59-60
61-62-63
64-65-66-67
68-69-70-71
72-73-74
76
77-78-79-80
81-82-83-84-85
86-87-88-89-90
91-92-93-94-95
96-97-98-99-100

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 373

Dimensions in mm - source DIN 373
Publication date: 12/2007 Replaces 08/1975 edition
d2		d1=1/3 d2	d3	l1	l2	13	l4
from	to	d1=1/3 d2	d3	l1	l2	13	l4
2
3.15
5
8
12.5

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 1869

Dimensions in mm - source DIN 1869
Publication date: 11/2006 - Replaces DIN 1869: 3/1978
d			Series 1		Series 2		Series 3
d nom	from	to	l1	l2	l1	l2	l1	l2	l3
1.6	1.5	1.7	115	75	-	-	-	-	-
1.7	1.5	1.7	115	75	-	-	-	-	-
1.8	1.7	1.9	120	80	-	-	-	-	-
1.9
2
2
2.5
3
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
10.5
11
11.5
12
12.5
13

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 1870

Dimensions in mm - source DIN 1870
Publication date: 11/2006 - Replaces DIN 1870: 3/1978
d			Series 1		Series 2		1: Morse taper B acc. to DIN 228-1 Size
nom	from	to	l1	l2	l1	l2	1: Morse taper B acc. to DIN 228-1 Size
8	7.5	805	265	165	330	210	1
8.5	7.5	8.5	265	165	330	210
9	8.5	9.5	275	175	345	220
9.5	8.5	9.5	275	175	345	220
10	9.5	10.6	285	185	360	235
10.5	9.5	10.6	285	185	360	235
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
27.5
28
28.5
29
29.5
30
31

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 1897

Dimensions in mm - source DIN 1897
Publication date: 11/2006 - Replaces DIN 1897: 10/1984
d			l1	l2
h8	from	to	l1	l2
-	0.19	0.30	19	1.5
-	0.30	0.38	19	2
-	0.38	0.48	19	2.5
0.5	0.48	0.53	20	3
-	0.53	0.6	21	3.5
-	0.6	0.67	22	4
-	0.67	0.75	23	4.5
0.8	0.75	0.85	24	5
-	0.85	0.95	25	5.5
1	0.95	1.06	26	6
-	1.06	1.18	28	7
1.2	1.18	1.32	30	8
1.5	1.32	1.5	32	9
-	1.5	1.7	34	10
1.8	1.7	1.9	36	11
2	1.9	2.12	38	12
2.2	2.12	2.36	40	13
2.5	2.36	2.65	43	14
2.8	2.65	3	46	16
3	2.65	3	46	16
3.2	3	3.35	49	18
3.5	3.35	3.75	52	20
3.8	3.75	4.25	55	22
4	3.75	4.25	55	22
4.2	3.75	4.25	55	22
4.5	4.25	4.75	58	24
4.8	4.75	5.3	62	26
5
5.2
5.5
5.8
6
6.2
6.5
6.8
7
7.2
7.5
7.8
8
8.2
8.5
8.8
9
9.2
9.5
9.8
10
10.2
10.5
10.8
11
11.2
11.5
11.8
12
12.2
12.5
12.8
13
13.2
13.5
13.8
14
14.25
14.5
14.75
15
15.25
15.5
15.75
16
16.25
16.5
16.75
17
17.25
17.5
18
18.25
18.5
18.75
19
19.25
19.75
20
20.25
20.5
20.75
21
21.25
21.5
21.75
22
22.25
22.5
22.75
23
23.25
23.5
23.75
24
24.25
24.5
24.75
25
25.25
25.5
25.75
26
26.25
26.5
26.75
27
27.25
27.5
27.75
28
28.25
28.5
28.75
29
29.25
29.5
29.75
30
30.25
30.5
30.75
31
31.25
31.5
31.75
32
32.5
33
33.5
34
35
35.5
36
36.5
37
37.5
38
38.5
39
39.5
40
-
-
-
-

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 844

Dimensions in mm - source DIN 844
Publication date: 4/1989 Replaces DIN 844 09/1978
d1	d2	L1	L2	Z nr. of flutes
2	6	51	7	3
3
4
5
6
8
10
12
14
16
18
20
22
24
25
26
30
32

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Standard DIN 6527

Dimensions in mm - source DIN 6527
Publication date: 1/2012 Replaces DIN 6527 02/1992
d1(h10)	d (h6)	l	I2	l1
2	3	38	6	28
2.5	3	38	7	28
3
3
3.5
4
4
4.5
5
5
6
7
8
9
10
12
14
16
18
20

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Liste der DIN-Normen für Bohrer, List of DIN norms for drills, Elenco norme DIN per punte a forare
DIN nr.	Deutsch	English	Italiano
333	Zentrierbohrer 60°; Form R, A und B	60° centre drills; types R, A, and B	Punte a centrare 60°, tipo R, A e B
335	Kegelsenker 90°	Countersinks 90°	Svasatori conici 90°
338	Kurze Spiralbohrer mit Zylinderschaft	Parallel shank twist drills, jobber series	Punte elicoidali codolo cilindrico
340	Lange Spiralbohrer mit Zylinderschaft	Parallel shank twist drills, long series	Punte elicoidali, codolo lungo
345	Spiralbohrer mit Morsekegelschaft	Morse taper shank twist drills	Punte elicoidali con attacco conico
373	Flachsenker mit Zylinderschaft und festem Führungszapfen	Counterbores with parallel shank and solid pilot	Lamatori
1869	Überlange Spiralbohrer mit Zylinderschaft	Parallel shank twist drills, extra long series	Punte elicoidali extralunghe
1870	Überlange Spiralbohrer mit Morsekegelschaft	Morse taper shank twist drills, extra long series	Punte elicoidali extralunghe, codolo conico
1897	Extra kurze Spiralbohrer mit Zylinderschaft	Parallel shank twist drills, stub series	Punte elicoidali extracorte
-	Bohrer mit Einsätzen	Drills with inserts	Punte ad inserti
-	Reibahlen	Reamers	Alesatori
844, 6527	Schaftfräser	End mills	Frese a candela

Technical data for Drill bits

This product is regulated by the following standards:

Standard DIN 333

Standard DIN 335

Standard DIN 338

Standard DIN 340

Standard DIN 345

Standard DIN 373

Standard DIN 1869

Standard DIN 1870

Standard DIN 1897

Standard DIN 844

Standard DIN 6527

Drill bits

Suppliers of Drill bits

We supply more than 4,000 workshops, carpenters, metal construction companies and industries, in an area of 80 kilometers. The wide range of about 35,000 items guarantees high availability in stock. Thanks to our fleet of 10 trucks, we are able to provide our customers a reliable and quick service.

Distributor of toolings

Manufacturer of achors, plugs, fixing elements

Manufacturer of tools for drilling, countersinking, sawing and fixing

Distributor of anchors, hand tools, woodscrews and rivets

Manufacturer of drill bits

Manufacturer of tools, bits, screwdrivers

Manufacturer of drill bits

Manufacturer of masonry drill bits and cutting tools

Rotary hammer drill bits and core bits manufacturer