Unhardened taper pins

Dimensions in mm - source DIN 1
Publication date: 09/1981 Supersedes:  DIN 1:  03/1961
d1	0.6	0.8	1	1.5	2	2.5	3	4	5	6	8	10	12	14	16	20	25	30	40	50
d1 max	0.6	0.8	1	1.5	2	2.5	3	4	5	6	8	10	12	14	16	20	25	30	40	50
d1 min
c
r ≈

DIN 1 - ≈ weigth, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercial items
size	0.6	0.8	1	1.5	2	2.5	3	4	5	6
nominal length l
4	0.01
6	0.017	0.028
8
10
12
14
16
18
20
22
24
26
28
30
32
36
40
45
50
55
60
70
80

DIN 1  - Approximate weigth, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercial lengths
d thread size	8	10	12	14	16	20	25	30	40	50
nominal length l
28	12.3
30	13.1
32
36
40
45
50
55
60
70
80
90
100
110
120
130
140
150
165
180
200
230
260

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Unhardened taped pins

This norm DIN EN 22339 specifies the characteristics of unhardened taper pins, with metric dimensions and nominal diameter "d" from 0,6 to 50 mm inclusive.

Dimensions in mm - source DIN EN 22339
Publication date: 10/1992  Supersedes:  DIN 1:  09/1981
Type A(ground pins) : Surface finish Ra=0,8 μm  -  Type B (turned pins) : Surface finish Ra=3.2 μm
d	0.6	0.8	1	1.2	1.5	2	2.5	3	4	5	6	8	10	12	16	20	25	30	40	50
a ≈

DIN EN 22339 10/1992 - ≈ weigth, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercial items
size	0.6	0.8	1	1.2	1.5	2	2.5	3	4	5
nominal length l
2
3
4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
32
35
40
45
50
55
60

DIN EN 22339 10/1992  - Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercial lengths
d thread size	6	8	10	12	16	20	25	30	40	50
nominal length l
22	5.25	9.16
24	5.76	10
26	6.28	10.9	16.9
28
30
32
35
40
45
50
55
60
65
70
75
80
85
90
95
100
120
140
160
180
200

Reproduced by permission of DIN Deutsches Institut für Normung e. V. The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from Beuth Verlag GmbH,Burggrafenstraße 6, 10787 Berlin, Germany.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Taper pins, unhardened

This norm specifies the characteristics of products with metric dimensions and nominal diameters from 0,6 mm up to and including 50 mm; includes specifications with reference to International Standards; gives an example for the designation.

Dimensions in mm - source ISO 2339
Publication date: 11/1986
d	0.6	0.8	1	1.2	1.5	2	2.5	3	4	5	6	8	10	12	16	20	25	30	40	50
d max= nom size	0.6	0.8	1	1.2	1.5	2	2.5	3	4	5	6	8	10	12	16	20	25	30	40	50
d min
a ≈

The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from ISO - International Organization for Standardization, Chemin de Blandonnet 8 CP 401 1214 Vernier, Geneva, Switzerland.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Taper pins

Example and prospectus with designation. Material: steel with unit breaking load r greater than or equal to 1000 n / mm2 (100 kgf / mm2) and resilience kcu greater than or equal to 55 j / cm2 (5.5 kgf.M / cm2) in the finished state.

Dimensions in mm - source UNI 7283  Withdrawn
Publication date : 06/1974
d	2	2.5	3	4	5	6	8	10
c	0.3	0.4	0.45	0.6	0.75	0.9	1.2	1.5
r

The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from UNI - Ente italiano di normazione Via Sannio 2 - 20137 Milano, Italy.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Taper pins, unhardened

Dimensions in mm - source NF E25-752  Withdrawn
Publication date : 12/1992
d nominal diameter=max	Ø0.6	Ø0.8	Ø1	Ø1.2	Ø1.5	Ø2	Ø2.5	Ø3	Ø4	Ø5
d min	0.56	0.76	0.96	1.16	1.46	1.96	2.46	2.96	3.952	4.952
a

d nominal diameter=max	Ø6	Ø8	Ø10	Ø12	Ø16	Ø20	Ø25	Ø30	Ø40	Ø50
d min	5.952	7.942	9.942	11.93	15.93	19.916	24.916	29.916	39.9	49.9
a	0.8	1	1.2	1.6	2	2.5	3	4	5	6.3

The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from AFNOR - Association Française de Normalization, 11 Rue Francis de Pressensé, 93210 Saint-Denis, France.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.

Taper pins unhardened

Dimensions in mm - source UNI 129  Withdrawn
Publication date : 1981
d	3	4	5	6	8	10	12
a	0.4	0.5	0.63	0.8	1	1.2	1.6

UNI 129 Approx.  weights, in kg x1000 pcs, (ρ=7,85 kg/dm3) - commercial lengths
d thread size	3	4	5	6	8	10	12
nominal length l
14	0.88
16
20
25
30
35
40
45
50
55
60
70
80
90
100
110
120

The definitive version for the implementation of this standard is the edition bearing the most recent date of issue, obtainable from UNI - Ente italiano di normazione Via Sannio 2 - 20137 Milano, Italy.
WARNING - The datasheets provided by this site (fasten.it) are only advisory in support of the commercial activity and their use by anyone is entirely voluntary. Reliance on their contents for any purpose by anyone is at his/her sole risk and Fasten.it s.r.l./www.fasten.it is not responsible for any loss, claim or damage arising there from.